[basic information]

The round wood push table saw is an ideal product to replace the band saw. It is suitable for veneer processing of round logs with various diameters. It has high processing accuracy and fine workmanship. It can saw logs with a diameter of 50cm. The utility model has the advantages of simple operation and can freely adjust the specification of the processed plate without the operation of a professional sawing master; The processing efficiency is higher than that of band saw. The processed products are smooth and standard, and do not need to be processed twice by planer and other equipment.

[advantages]

1. Up and down single saw, up and down saw design, small sawing path and accurate sawing. The saw pin surface shall be flat and smooth to avoid band saw bending and pit digging.

2. Precision sawing, the sawing size can be adjusted as required, and can be sawed into specification pieces or wood strips according to the adjusted size. The finished surface of wood strips or plates is smooth without further planing.

3. Ordinary band saw requires skilled operators, and band saw masters are difficult to find and have high wages. The use of this machine is simple and safe. It can be operated on the machine only by simple training of ordinary employees, saving labor costs for customers.

4. imported saw blade is adopted, which is heat-resistant, wear-resistant and not deformed.

5. The frame adopts thick square tube, which is cut and formed without deformation and accuracy

6. Spindle, heat-treated steel, imported bearing, high balance and long service life.

7. It has the advantages of reasonable structure, beautiful appearance, high efficiency and energy saving, environmental protection, safety and reliability. It is suitable for the processing of blockboard, finger board, wood line, plate and square material. It is the equipment in construction, furniture, wood, processing and other industries.

[main features]

1. Round log sliding table saw with lifting spindle, one for top and two for original use.

2. A round log push table saw with a diameter of 500 mm can be sawed.

3. imported circular steel guide rail is adopted, which is wear-resistant, accurate and light, and the straight-line error of the whole process is less than 0.15mm.